K1EL CW Keyer – BK

£32.95

31 in stock

Category: Tag:

Description

Description

The K16 is a single chip Morse code keyer with a wide range of features. It is implemented in a Microchip PIC12F1840 single chip microcontoller. A powerful keyer can be constructed using a K16 with a minimum number of components. Setup commands are directly entered on the paddles in Morse code. When not in use, the K16 will automatically enter a low power sleep mode so it can run off a battery for many months. All settings and messages are stored in nonvolitile memory so that if power is removed they are preserved. The K16 has many original features not found in other keyers. Please Note: The K16 is not pin compatible with either the K10+,K12, or K14 I.C.s

FEATURES

  • Keyer speed range: 5 – 99 WPM
  • HSCW: 1000, 1500, 2000, 3000, 4000 or 6000 lpm
  • QRSS: 3, 6, 10, 12, 30, 60 second dits
  • Non-Volatile Message Memory: 240 letters in twelve Slots/dual banked with embedded commands.
  • Dynamically allocated message memory
  • Backspace supported on message entry
  • Keying Modes: Bug, Ultimatic, Iambic A or B
  • Serial Number Generation
  • Audio Frequency keying mode
  • Adjustable Letter Spacing: 25 to 75%
  • Adjustable Weighting: 25 to 75 %
  • Automatic letterspace mode (Autospace)
  • Adjustable Keying Compensation: 0 to 31 mSec
  • Paddle swap command
  • Beacon: Programmable interval: 1 to 99 seconds
  • Sidetone Output: TTL Square wave, 100Ω output Z
  • Continuously adjustable Sidetone frequency
  • Keying output: TTL, high true when keyed
  • Speed control potentiometer
  • Push-button user interface
  • 39 easy to use commands
  • Operating Voltage: 2.5-5.0 VDC, built in oscillator
  • Power Consumption: <1 ma active, <18 μA standby
  • Supply Voltage Monitor
  • Two User Configurations each with callsign
  • Rx and Tx Practice Modes
  • Ability to key two separate radios

PLEASE NOTE:

For for those that purchased their kit from Kanga (UK) – Click Here to download the build instructions K16-BK_UK Ver_1.1

Once you have built your K16 CW Keyer – BK, you will need to download the user manual from here: https://www.hamcrafters2.com/K16keyer.html

If you purchased your kit direct from K1EL, then you must download from here. https://www.hamcrafters2.com/K16keyer.html

Additional information

Weight 200 g

Reviews

There are no reviews yet.

Be the first to review “K1EL CW Keyer – BK”

Your email address will not be published. Required fields are marked *