PLEASE NOTE, WE DO NOT SEND THE INSTRUCTIONS WITH THIS KIT, YOU NEED TO DOWNLOAD THEM. THE INSTRUCTIONS ARE NEARLY 30 PAGES AND INCLUDE FULL COLOUR PHOTOS TO HELP WITHTHE BUILD. INSTRUCTIONS ARE OFTEN UPDATED WITH NOTES AND CONSTRUCTION HELP FROM CUSTOMER FEEDBACK
The Rooster is a replacment for the old FOXX3 kit that Kanga produced for many years. We still get asked for it but we decided to produce a new kit with better performance while keeping the cost low. We wanted more power, better BCI rejection, some audio filtering and a more practical case that was supplied as standard with the kit. The result was the Rooster. Part SMD design but ALL the SMD parts are pre-installed for you leaving around 20 parts to fit. Introduced for the first time at the RSGB 2023 National Conference .
The Rooster will give approx 2 watts of RF @13.8v (7.030MHz) or 1.5 watts on 10.116Mhz
The Rooster is supplied with a strong statin finsh aluminium case.
The manual is over 30 pages, full of colour photos and is only availiable online.
We also offer alternative sets of crystals for the 40 Rooster :
7.028MHz crystals (Tunes to approx 7.02835 in the Rooster), 3 needed per Rooster
7.0293Mhz Crystal ( Only one needed )
The crystals are avaiable via the shops Crystal Page.
Please select either the 40m or 30m version when ordering, also the optional volume control lead is offered at a reduced price when buying it with the kit.