Rooster 30m CW Transceiver

FULL INSTRUCTIONS HERE

PLEASE NOTE, WE DO NOT SEND THE INSTRUCTIONS WITH THIS KIT, YOU NEED TO DOWNLOAD THEM. THE INSTRUCTIONS ARE NEARLY 30 PAGES AND INCLUDE FULL COLOUR PHOTOS TO HELP WITHTHE BUILD. INSTRUCTIONS ARE OFTEN UPDATED WITH NOTES AND CONSTRUCTION HELP FROM CUSTOMER FEEDBACK

The Rooster is a replacment for the old FOXX3 kit that Kanga produced for many years. We still get asked for it but we decided to produce a new kit with better performance while keeping the cost low. We wanted more power, better BCI rejection, some audio filtering and a more practical case that was supplied as standard with the kit. The result was the Rooster. Part SMD design but ALL the SMD parts are pre-installed for you leaving around 20 parts to fit. Introduced for the first time at the RSGB 2023 National Conference . 

The Rooster will give 1.5 watts of RF @13.8v  (10.116MHz)

The Rooster is supplied with a strong statin finsh aluminium case.

The manual is 26 page  full of colour photos and is only availiable online. 

We also offer  alternative sets of crystals for the Rooster : 

10.106MHz crystals , 3 needed per Rooster

The crystals are avaiable via the shops Crystal Page..

Also just out now, a small in line volume control adapter, a nice little low cost add on.