The RockRose CW Transceiver (40m, 30m, and 20m Versions)

Shop

The RockRose CW Transceiver

  • The RockRose CW Transceiver (40m, 30m, and 20m Versions)

  • Crystal controlled 3 watt transceiver with built in keyer, 2 channels from one crystal
  • From £54.99
Band:

:  at  £54.99  each

Full Instructions can be found here 40m Version 

 Instructions for 30m Version Here

Instructions for 20m Version Here

The RockRose is designed to be a single evening or weekend project that will be fun to build and even more fun to use but with more parts and a more complicated alignment procedure we feel the RockRose is more suited for intermediate level builders. If you’re not experienced with building kits the Rooster is still a better starting point and we will continue to offer that too. The RockRose kit uses a mix of SMD and though hole parts, ALL the SMD parts are pre-installed but still leaving about 40 parts to fit to complete the transceiver. The kit can be completed in a comfortable 2-3 hours by an experienced builder but a less experienced builder may want to take more time and this would be a good choice for an intermediate level build-a-thon or club build with more experience helpers and more time if needed.

The RockRose has a built in Iambic keyer (Mode B) that allows adjustment of the keying speed, it also has a built in Auto CQ call feature too.  Another feature allows selection of Iambic/BUG/ or straight key modes (see instructions) 

The RockRose will require a suitable antenna with a low SWR, headphones, power source, and of course a Morse Key!

 We also sell an inline volume control that works great with headphones plugged into the RockRose, you can save a little by buying the control at the same time as the kit (its just £1 if ordered with the kit) you will see it on the pull down menu.

Intermediate Build Crystal controlled Transceiver.
2 frequency operation from one crystal
Built in Iambic Keyer (Mode B). One touch auto CQ Calling
 Bug emulation mode and Straight key over ride
Direct Conversion Design
Part SMD design (Pre-installed)
approx 30 parts to fit. Just two simple toroidal coils to wind
Front Panel Channel switch
approx. 3 Watts (Adjustable) on 40m or 30m, 2 Watts on 20m
Active Audio Filter
 Sinewave CW Sidetone
Visual RX/TX indicator
9-14v DC Operation  Total built weight approx. 165g

Full details in the instruction manual